Introduction to the incubator: 

The incubator is also called biochemical incubator or bacterial incubator, mold incubator, microbial incubator, biochemical mold incubator, automatic biochemical incubator. 

Incubator is widely used in environmental protection, health and epidemic prevention, drug testing, agriculture and livestock, aquatic products and other research, colleges and universities, production departments, is the water analysis and determination, bacteria, mold, microbial culture, preservation, plant cultivation, breeding experiments of special thermostat equipment.

Incubator with refrigeration and heating two-way temperature control system, temperature control function, is the biological, genetic engineering, medicine, health and epidemic prevention, environmental protection, agriculture, forestry and animal husbandry and other industries of scientific research institutions, universities, production units or departments of the laboratory important test equipment. The incubator is widely used in low temperature constant temperature test, culture test, environmental test and so on. The incubator controller circuit is composed of temperature sensor, voltage comparator and control executive circuit.

Technical parameters of incubator:

Incubator studio volume :70 liters, 150 liters, 250 liters, 350 liters, 500 liters, customizable

Temperature range: 5 ~ 60℃

Temperature control accuracy: 0.1℃

Temperature uniformity: ≤±1℃

Temperature fluctuation: ≤±0.6℃

Control mode: fuzzy logic control technology

Display mode: LED

Air supply mode: forced convection

Number of doors: single-layer doors

Ambient temperature (° C) : 5 to 35

Temperature control mode: set value, pace optional

Segments/steps: 10 segments (" 0 "is the scheduled segment," 1-9 "is the program control segment) /18 steps

Time per step: 100 (h)

Temperature adjustment range (° C) : -10 to 65

Temperature adjustment accuracy (℃) : ≤±0.2 (37℃)

Temperature fluctuation (℃) : ≤±0.1

Temperature uniformity (℃) : ≤±0.3~1

Safety function: self-diagnosis function: power failure alarm, sensor fault alarm, upper and lower limit overtemperature alarm, independent overrise prevention device (adjustable at 30-80℃), independent overtemperature protector, independent leakage, over-current trip protection.

Accessory functions: automatic operation, automatic stop, monitor timer, call recovery, parameter memory, temperature correction, Φ50 test hole, RS-232 interface

Optional function: embedded. Micro. Built-in printing function

Refrigeration function: air-cooled. R134. Power controlled refrigeration. Frost-free operation

Capacity (L) : 160 270 430

Number of shelves (pieces) : 2 (Max. 4)

Net weight (kg) : 98 140 185

Liner size (mm) : 500*500*650 600*600*750 700*645*950

Size (mm) : 650*680*1360 750*780*1460 850*820*1660

Package size (mm) : 770*800*1530 870*900*1630 970*940*1830

Work rate (W) : 750 900 1250

Power source: AC 220V 50/60Hz

How to use the incubator

1. Open the door of the incubator, put the items to be treated on the shelf of the incubator, and close the door of the incubator.

2. Connect the power supply of the incubator, insert the three-core plug into the power socket, and place the power switch on the panel in the position of "on". At this time, the digital display of the instrument indicates that the incubator is in the working state.

3, by operating the temperature controller on the control panel of the incubator, set the temperature you need

When the set temperature is greater than 5 ° C, set the refrigeration switch to RT+5 ° C. (See the following page for detailed operating instructions on the temperature controller.)

4. The incubator starts to work, and the temperature in the incubator gradually reaches the set value. After the required processing time, the processing work is completed.

5. Turn off the power supply. When the temperature in the box is close to the ambient temperature, open the door and take out the objects 

Tips: As the incubator is constantly upgraded, the incubator picture is only for reference, details email consultation! More quality products welcome your consultation!

　　Dongguan Runzhi Electronics Co., Ltd.-Testing Instrument Division is mainly engaged in various laboratory supplies and testing instruments and equipment: workbench, environmental experiment instrument, element detection combined instrument, floor special residual sag tester, lock size tester , Straight-line right angle detector, microcomputer push-pull force meter, static bending strength tester, high-precision video projector, caster tester, falling ball tester, falling sand meter, 90-degree peel strength tester, scratch resistance tester, Grinding tester, gloss meter, whiteness meter, energy meter, specific gravity meter, infrared thermometer, viscometer, thickness meter, depth meter, analytical balance, calipers, feeler gauge and other instruments and equipment are available. Welcome new and old customers from all over the country to call and post for consultation: