Introduction to electronic scales:

　　Electronic scales are carefully designed and manufactured using high-precision resistance strain sensors and the latest single-chip technology, and are suitable for accurate weighing and counting in industrial and mining enterprises. It has the characteristics of small size and simple maintenance.

1. The electronic scale has the functions of single weight automatic averaging and quantitative warning;

2. The electronic scale has the function of accumulating times and quantities;

3. The electronic scale can adjust the filter stability parameters, and the weighing response speed can be adjusted according to the different use environments;

4. The electronic scale has the functions of automatic zero setting, zero tracking, full-section peeling and pre-tareing;

5. The electronic scale has a built-in maintenance-free lead-acid battery and a high-efficiency charging circuit, which can be used for both AC and DC;

6. The electronic scale has 3 LED lights to indicate the current power and charging status, which can clearly understand the remaining power or charging status;

7. Electronic scale RS-232C interface, baud rate and transmission mode can be selected (optional equipment);

8. The electronic scale has a well-designed transport protection point function.

Electronic scale main technical parameters:

1. The electronic scale meets the requirements of GB/T26497-2011 standard;

2. Electronic scale sensor: resistance strain type weighing sensor;

3. Electronic scale LCD display with automatic backlight function;

4. Electronic scale keyboard: push-button keyboard;

5. Electronic scale power supply voltage AC 110V~220V (+10%~-15%) /50Hz, <10W;

6. Electronic scale DC: 4V/4Ah rechargeable battery;

7. Electronic scale ambient temperature: 0°C~+40°C;

8. Electronic scale storage and transportation temperature: -25°C~55°C;

9. Relative humidity of electronic scale: ≤85%RH;

10. Electronic scale warm-up time: 10~15 minutes.

Electronic scale counting operation instructions:

1. Start up: When the quantity (weight) to be weighed is outside the warning value range, an alarm will be issued, remove the object on the balance, turn on the power switch, the electronic balance will display self-test, and then return to zero to enter the weighing and counting state.

2. Shutdown:

Turn the power switch to "OFF" state to shut down.

3. Zero setting function:

During use, if there is no item on the balance, but the weight has a phenomenon of zero drift (that is, there is a weight display), press the key to return to zero, and the indicator of the zero mark "one 0 one" will appear. The weight value of the item is within the zeroing range and can be reset to zero arbitrarily. If the weight value exceeds the zero range or in tare state, pressing the zero key is invalid.

4. Peeling function:

If you need to use the package to weigh items, follow the steps below: put the package on the balance, press the Tare key to subtract the weight of the package. The weight value is displayed as zero and the tare symbol "one cent" indicator appears. Then put the item to be weighed into the package, and the displayed weight value at this time is the net weight of the item. After the packaging and items are removed, the weight value will be displayed as a negative value. Press the Tare key again to cancel the tare mode.

5. Single weight setting:

When the individual weight of the element to be counted is known (single weight, that is, the average weight of a considerable number of elements

, use the number keys to input the individual weight value of the component (unit: 8). After confirming, press the single weight setting key, return to the balance and add the same component to display the quantity of the component.

6. Quantity setting:

Use the number keys to input the quantity value of the purchased sample component, press the quantity setting key after confirming, after the unit weight value of the component is displayed, then add the same component on the balance to display the quantity of the component.

7. Clear:

When you find that the entered number is wrong, press the clear key and re-enter. Can also be used to clear single weight values.

Reminder: Due to the continuous upgrading of electronic scales, the pictures of electronic scales are for reference only, please email us for details! More high-quality products welcome your consultation!

　　Dongguan Runzhi Electronics Co., Ltd.-Testing Instrument Division is mainly engaged in various laboratory supplies and testing instruments and equipment: workbench, environmental experiment instrument, element detection combined instrument, floor special residual sag tester, lock size tester , Straight-line right angle detector, microcomputer push-pull force meter, static bending strength tester, high-precision video projector, caster tester, falling ball tester, falling sand meter, 90-degree peel strength tester, scratch resistance tester, Grinding tester, gloss meter, whiteness meter, energy meter, specific gravity meter, infrared thermometer, viscometer, thickness meter, depth meter, analytical balance, calipers, feeler gauge and other instruments and equipment are available. Welcome new and old customers from all over the country to call and post for consultation: 

Website: https://www.instrumentvip.com/

Contact person: Mr. Zheng