Introduction to hardness tester:

Product name: TECLOCK hardness tester

Models: Type A, C, D.

Pressure needle height: 2.54mm

Weight: 0.3kg

Optional accessories: a pair of hardness tester support

Origin: Japan

Application scope of hardness tester:

1. Soft rubber soft plastic, cloth, bee groove (foaming) materials, paper and other materials hardness. Directly apply a certain pressure to the surface of the material, the pointer points to the position is the hardness of the measured object

2, Applicable materials: sponge, blanket, soft rubber, hard foam glue, pipe yarn, clay, etc.

3. SRIS type

4. Soft rubber

5, used for bending and hard thread.

Hardness tester instructions:

1.TECLOCK rubber hardness tester, in some cases, such as measuring surface uneven or narrow flat and deep bottom, can be accurate measurement.

2.TECLOCK hardness tester has digital display, pointer (double needle and single needle).

The product is also available in a variety of designs including the deep hole (H) type and the long leg (L) type, both of which offer a pointer type and a digital display dial.

3. TECLOCK hardness gauges comply with JIS K 7215 standards.

Hardness tester purchase need to know:

There are three universal hardness tester models, A, D and C type, when measured with A type, hardness is greater than 90, it is suitable for D type, when using A type, hardness is less than 20, it is suitable for C type.

Type A is a rubber hardness tester for general plastics.

E type is a hardness tester for soft plastics such as sponge. Soft rubber, etc.

Type C is A rubber durometer with a hardness less than type A.

Type D is a hardness tester for measuring high hardness. Such as hardness rubber, plastic hard rubber. If there is an unbalanced measuring surface, reduce the plane, for the irregular shape concave concave deep bottom, can be very good measurement, digital display, easy to read the measurement value. Rubber durometers consist of three types: medium hardness Type A, high hardness type D, and low hardness type E. As the center type A is more likely to represent high value 1 ~ 2 decimal points than the future A-shaped hardness tester. Type D is hard rubber with A measured value above 90 according to type A, and type E is soft rubber with a measured value below 20.

Application of hardness tester:

There are three universal models of hardness tester, A, D and E type, when using A type measurement, hardness is greater than 90, it is suitable for D type, when using A type, hardness is less than 20, it is suitable for E type.

Type A is a rubber hardness tester for general plastics.

E type is a hardness tester for soft plastics such as sponge. Soft rubber, etc.

Type C is A rubber durometer with a hardness less than type A.

Type D is a hardness tester for measuring high hardness. Such as hardness rubber, plastic hard rubber. If there is an unbalanced measuring surface, reduce the plane, for the irregular shape concave concave deep bottom, can be very good measurement, digital display, easy to read the measurement value.

Features:

GS-702N Type D hardness tester, suitable for manual measurement.

GS-702G Type D hardness tester, suitable for manual measurement, has an additional setting pin relative to the GS-719N.

GS-709R, Type A hardness tester, suitable for manual measurement.

GS-709G, Type A hardness tester, for manual measurement, has an additional setting pin relative to the GS-709N.

Tips: As the hardness meter is constantly upgraded, the hardness meter picture is for reference only, details email consultation! More quality products welcome your consultation!

Dongguan Runzhi Electronics Co., Ltd.-Testing Instrument Division is mainly engaged in various laboratory supplies and testing instruments and equipment: workbench, environmental experiment instrument, element detection combined instrument, floor special residual sag tester, lock size tester , Straight-line right angle detector, microcomputer push-pull force meter, static bending strength tester, high-precision video projector, caster tester, falling ball tester, falling sand meter, 90-degree peel strength tester, scratch resistance tester, Grinding tester, gloss meter, whiteness meter, energy meter, specific gravity meter, infrared thermometer, viscometer, thickness meter, depth meter, analytical balance, calipers, feeler gauge and other instruments and equipment are available. Welcome new and old customers from all over the country to call and post for consultation:

Website: https://www.instrumentvip.com/

Contact person: Mr. Zheng