Brief introduction of pointer tension machine:

Pointer tension machine is widely used in high and low voltage electrical appliances, electronics, hardware locks, auto parts, lighters and ignition devices, pen making, light industry, construction, fishing gear, textile, chemical industry, machinery, IT and other industries and scientific research institutions. Pressure load, insertion force test, destructive test, etc.

Instructions for use of pointer tension machine:

1. When using the pointer tension machine for destructive debugging, you should wear protective masks and gloves to prevent splashing substances generated during the debugging process;

2. When using the pointer tension machine, do not use the damaged or bent debugging head, otherwise the debugging object may fall on the feet and hurt the body;

3. Do not use the pointer tension machine to measure the load exceeding the maximum debugging load, otherwise the elastic force of the load detection mechanism will gradually deteriorate, resulting in the detected load value failing to meet the required accuracy level.

4. Do not do load tests in directions other than push and pull on the pointer tension machine.

5. When the debugging rod is not connected to any debugging head, the load under test cannot be directly applied to the end of the debugging rod.

6. If the user needs to make a special debugging joint, it must be able to withstand the maximum debugging load of the push-pull force gauge, otherwise the debugging joint may break during the debugging and cause an accident.

Precautions for pointer tension machine:

1. There is a load cell and a circuit in the pointer push-pull gauge. Protect push-pull gauges from sudden temperature changes, heat, high humidity, moisture, dust and strong impacts.

  2. The pointer push-pull force gauge can only be used for force measurement, and cannot be used for other purposes.

  3. The operating temperature of the pointer push-pull gauge is 0~40℃. In order to obtain higher measurement accuracy, please use it within the temperature range specified in the inspection certificate.

  4. Regardless of whether the push-pull force gauge is on or off, it is not allowed to measure the force exceeding F.S, or bend the measuring shaft.

  5. Only the dedicated AC adapter for the pointer push-pull gauge can be used

  6. Before installing or using the pointer push-pull gauge, you should read this operation manual.

  7. Do not use organic solvents such as paint thinner to clean the dust on the pointer push-pull gauge.

  8. When measuring some damaged samples, the operator should wear protective devices to protect eyes and body and prevent debris from splashing.

  9. Do not disassemble or refit the pointer push-pull gauge.

  10. After use, please store the pointer push-pull gauge in the matching carrying case to avoid impact on the measuring axis.

Features of the pointer push-pull force gauge:

1. The high-resolution 1/200 scale plate of the pointer push-pull gauge is clear and easy to read

  2. The high-precision precision of the pointer push-pull gauge is 0.5[%] of the full scale

  3. The pointer-type push-pull gauge has good operability. Rotate the setting button, and it is easy to grab the peak value or test the intermediate value.

  4. The pointer type push-pull gauge can see two units of N and Kgf at the same time, regardless of the unit of N or Kgf, it can be done in one tension gauge, killing two birds with one stone.

  5. The pointer type push-pull gauge is light in weight, and the body is light in weight, and it is very flexible to operate with one hand.

  6. The pointer type push-pull gauge is rich in specifications. According to the application, there are 8 specifications from 1Kgf to 50Kgf and 3 kinds of scale plates to choose from.

  7.The pointer push-pull force gauge is small in weight and easy to carry. However, some relevant data cannot be saved. For the convenience of customers to save data, there is also a computer tension gauge for you to choose. Please choose the appropriate product according to your actual needs.

Warm tip: due to the tension machine upgrade, tension machine picture for reference only, details email consultation! More quality products welcome your consultation!

Dongguan Runzhi Electronics Co., LTD. - Testing Instrument Division, founded in 2011, is a high-tech enterprise with many years of professional electronic technology and instrument research and development professionals to set up a set of professional laboratory testing equipment, research, development, manufacturing.

Dongguan Runzhi Electronics Co., Ltd. mainly engaged in special instruments and equipment are: Laboratory environment test instrument, element detection instrument, floor residual pitting meter, lock size tester, straight Angle detector, microcomputer push tension meter, static bending strength testing machine, high-precision image projector, caster testing machine, falling ball tester, falling sand meter, 90 degree peeling strength testing machine, scratch resistance tester, wear resistance tester, gloss meter, whiteness meter, Energy meter, hydrometer, infrared thermometer, viscometer, thickness meter, depth meter, analytical balance, caliper, gauge and other instruments and equipment.

Dongguan Runzhi Electronics Co., Ltd. operating products with strong targeting, a wide variety of functions, excellent quality, adequate inventory, after-sales support and other advantages, welcome new and old customers all over the country to call to mail consultation: