Introduction of blender:

Blender(or agitator ,stirrer, mixer) is an experimental equipment for liquid mixing and stirring , which is suitable for experimental fields such as biology, physics and chemistry, cosmetics, health care products, food, and reagents. The blender has a novel concept design, advanced manufacturing technology, large torque output at low speed, and good continuous use performance. The drive motor adopts a series-excited micro motor with large power and compact structure, which is safe and reliable in operation; the operation state control adopts a numerical control touch-type stepless speed regulator, which is convenient for speed regulation; the digital display of the operation speed state and the collected data are correct; the output booster mechanism Multi-stage non-metallic gears are used to transmit the force, the torque is doubled, the running state is stable, and the noise is low; the special rolling head of the stirring rod of the blender is easy and flexible to disassemble and install. The blender is an ideal equipment used in scientific research, product development, quality control and production processes such as factories, scientific research institutions, colleges and universities, and medical units.

Blender technical parameters:

Working voltage: AC220V50~60HZ+15%

Loading speed: 0-1500r/min

Motor torque: 0.7mN.m

Speed range: 60~1500г/min

Chuck clamping size: Ф2~13 mm

Applicable medium viscosity: 0~50000mpas

Small and large torque of stirring shaft: 0.5Nm

Drill chuck clamping range: 1.5~13cm

Dimensions: 380x320x720mm

Weight: 8.5kg

How to use the blender :

1. blender installation: install the column of the blender into the base and tighten it, tighten the screws, install the ten-byte on the column, and insert the cross-bar of the main engine into the ten-byte to fix it;

the stirring rod of the blender before use . The stirring rod can be directly loaded into the chuck for clamping, but the straightness of the stirring rod must be ensured, and the stirring rod can be connected with a soft connection shaft;

3. Before turning on the blender, first put the power switch in the off position, turn the knob counterclockwise to a smaller value , then plug in the power supply, turn on the power switch, the built-in indicator light of the switch is on, and the speed display is "0000", clockwise Slowly adjust the knob to the desired speed.

1. Speed setting, turn the knob to set the desired speed (clockwise up, counterclockwise down).

2. After the speed is set, press the knob to start stirring. If you don't reset it, it can be stored for a long time. Press the knob once while the blender is running, and the mixing will stop.

3. During the stirring process, turn the knob to modify the set speed. When the knob is turned, the liquid product screen will display the speed being modified. The actual speed will be displayed after the knob stops rotating for 1 second, and the modified speed will be displayed during the stirring process. ,do not save.

Blender matters needing attention:

1. When the blender is used, it should be accelerated slowly from slow to fast. If the straightness of the blender is poor, the speed cannot be fast or the support sleeve is used in the middle of the flexible connection shaft well.

2. Please do not get too close when the blender is working, so as to avoid dangers such as clothes and hair being involved;

3. Avoid liquid splashing when stirring.

Blender packing list :

1blender host;

1 base;

Ten bytes 1;

1 column;

1 bit wrench;

1 soft connection shaft;

1 instruction manual;

1 certificate of conformity (stick to the back of the blender main unit).

Warm tip: Due to the continuous upgrading of the blender, the picture of the blender is for reference only, details of the email consultation! More quality products welcome your consultation!

Dongguan Runzhi Electronics Co., LTD. - Testing Instrument Division, founded in 2011, is a high-tech enterprise with many years of professional electronic technology and instrument research and development professionals to set up a set of professional laboratory testing equipment, research, development, manufacturing.

Dongguan Runzhi Electronics Co., Ltd. mainly engaged in special instruments and equipment are: Laboratory environment test instrument, element detection instrument, floor residual pitting meter, lock size tester, straight Angle detector, microcomputer push tension meter, static bending strength testing machine, high-precision image projector, caster testing machine, falling ball tester, falling sand meter, 90 degree peeling strength testing machine, scratch resistance tester, wear resistance tester, gloss meter, whiteness meter, Energy meter, hydrometer, infrared thermometer, viscometer, thickness meter, depth meter, analytical balance, caliper, gauge and other instruments and equipment.

Dongguan Runzhi Electronics Co., Ltd. operating products with strong targeting, a wide variety of functions, excellent quality, adequate inventory, after-sales support and other advantages, welcome new and old customers all over the country to call to mail consultation: