Products
Flatness measuring instrument
Five Advantages Of Products
- No matter which kind of ceramic tile, its quality identification is not only wear resistance, water absorption, hardness, color difference, size and other standards, so it can be preliminarily judged by the following methods.
- Hanging method is cheaper, it is suggested that after the floor is flattened, lay moistureproof paper, which can effectively prevent moisture.
- Installation instruction A. direct pasting method: it is applicable to the floor with flatness no more than 2mm and above the first floor. 1. Fix it
- The principle of laser leveler is to set a horizontal plane, and then sweep the laser on the horizontal plane, and then receive it with the receiving target
- When the center of the receiving target is consistent with the elevation, it can be read out according to the elevation, so the laser level can be operated by one person.
Product Details
Product introduction:
The floor flatness meter can quickly and accurately measure the waveform distribution state existing on the surface of the flat object. This instrument is a product used to detect the flatness of PVC plastic floors, especially for the detection and analysis of waveform tolerances with planar errors. The instrument is small and delicate. , Easy to carry, can detect the size of the waveform tolerance zone of flat objects in real time, regardless of size.
Basic parameters of the floor flatness meter:
Name: Floor Flatness Tester
Alias: Floor level meter, flatness detector
Model: customized
Instrument components:
1. Display table
2. Main support board
3. Support block
4. Fixing bolts
5. Measuring head
6. Fixing parts
7. Support feet
Technical Parameters of Floor Flatness Tester:
Resolution: 0.01mm
Measuring distance: 30mm-340mm
Working temperature: 0~+40℃
Working humidity: ≤80%
Instructions for use of the floor flatness meter:
1. Adjust the measuring table and set it to track the maximum value. Adjust the spacing of the support blocks to the required size.
2. Adjust the position of the measuring head to ensure that the measuring head exceeds the plane of the three supporting feet by 2mm-3mm
3. Hold the instrument and gently stick it to the floor surface to ensure that the three supporting feet can touch the glass.
4. By sliding the position to be measured, the degree of curvature can be read from the measuring table.
5. The floor flatness meter is used to check the flatness of PVC plastic floor. According to its design principle, it can also be used to detect other products, but the data accuracy is not guaranteed! Please also note that if you need to detect the straightness and straightness of the floor and other parameters, you need to purchase a special "square ruler" or "dimension tester" for the floor. These two products are often used in conjunction, please follow your company's habits and needs Choose the right product!
Precautions for the use of floor flatness meter:
1. This instrument is a precision instrument, which prevents damages such as impact and drop.
2. All three supporting feet should touch the surface when in use, and the moving speed should be less than 0.5m/s.
3. Keep the appearance clean. It should be kept in the original packaging when not in use.
Features of Floor Flatness Tester:
1. It can continuously measure and monitor the flatness of the floor surface, and display and record the data.
2. Simple operation, quick measurement, low cost, and can be widely used for floor flatness measurement and monitoring.
3. The equipment has various specifications, and the measuring distance (300mm, 500mm, 800mm, 1000mm, 1200mm) can be customized as required.
If you want to know more about "Floor Flatness Tester" or laboratory testing equipment related information, please contact us!
If you want to buy our company's floor flatness tester or other testing equipment, please call:86+ 13712847488
Contact: Mr. Zheng
Company: Dongguan Runzhi Electronics Co., Ltd.
Bottom of the form
Address:No. 33, Zhenzhen Road, Mahougang, Dalingshan, Dongguan City,Guangdong Province
Phone: 86+0769-81660769
Website:www.instrumentvip.com
Dongguan Runzhi Electronics Co., Ltd.
Contact Person: Mr. Zheng
Department: Business Department
Post: Sales Manager
Telephone: +86 13712847488
Landline: +86 13717173764
Company Address: Room 101, 33 Zhenma Road, Dalingshan Town, Dongguan City, Guangdong Province,China
Factory Address: Room 101, No. 33 Zhenma Road, Dalingshan Town, Dongguan City, Guangdong Province,China
Website: runzhi.us764.com
Previous: Cain cup
Inquiry :
